As Quantum Resonance first began it's journey into making energetic devices, we quickly realized that the highest expression for this work is in the Quantum Resonance Crystal Bed. The crystal bed encapsulates years of work in light, sound, crystals, and other mediums into one design. One of the most important design elements are the holders for the vogel crystals. During the initial design of the holders, we have received guidance from spirit on how they were to be made, what was in them, and the reasons why.
The basic function of the crystal holder is to hold the crystals- pretty straight forward. This smack on the head seems basic however, if done differently than how Quantum Resonance made them, then the crystals would have had energies blocked. If we block the top or bottom of the crystal, then that hinders the overall process of energy transmission and is something spirit said a big NO to.
Guidance showed that we must not impede the flow of cosmic/ multidimensional energy coming through the top of the crystals. In order to do this, we had to figure a way to not only hold the crystals, but use all the other items we were planning.
The holders have certain elements to the design which makes the crystal bed really shine- literally! We have incorporated LED's, Lasers, PEMF coils (pulsed electromagnetic field), crystal chips, and orgone into the design to increase the flow of energy. We have used low voltage throughout the holder (the same as a few batteries) and kept a DC or direct current is the technology. Everything we are dealing with is a subtle energy system and BIG man-made energy (like your AC wall current) could potentially be deleterious to the client. Once again, Spirit came through and strongly showed that we needed to hold the crystals on the sides, use low voltage, and pulse the lights, lasers and magnetics and do so with variable frequencies!
The Significance of a Crystaline Matrix
The Quantum Resonance Crystal Bed just wouldn't be the same without the vogel type crystals- in fact, we couldn't call it a crystal bed at all. The crystals we use are some of the highest grade naturally occurring Quartz on the planet and are brought to super fine tolerances through loving hands. The crystals develop and work with scalar or zero point energy (multidimensional energy) and are truly remarkable in how they store and transfer information.1 The scalar energy can come from intention, atmospheric, LED's, lasers, magnetics, or other energy systems. A vogel type crystal will bounce energy back and forth inside the facets increasing the original amount of scalar energy.
Putting Spirit into Matter
Remembering how guidance came through on holding the crystals from the sides, we had to then figure out how to secure crystals that change size from top to bottom as well as various size crystals. An inspiration came through when we saw a how a 3 sided table always has perfect balance. The question arose: “What if we make a 3 pointed holder?” If we do, then they will always be held with equal pressure from those 3 points. The next step was to devise a way to contain not only the LED's but the PEMF coil, the lasers, and crystal chips.
Through many many trials of making negative and positive molds, of using plastic resins, epoxy resins, silicon and clay molds, we finally came up with a design that we have been using since the second crystal bed. Through the basic process, we have made subtle changes like adding the crystal chips, removing tabs, and epoxy formulations.
The basic design element is sound and works really well, however each bed requires 7 working holders so in the manufacturing process, the time it take from start to finish is well over 30 hours and an average of 10 holders per bed. If we hope to ever create a market with a larger audience, then we need to streamline the manufacturing process.
With the advent of sub $1000 dollar 3D printers, there has been an explosion in new concepts and designs that can be readily manifested in a day rather than the typical 6 month process. This allows for for rapid prototyping and experimenting with ideas that may never have been practical before. This is where Shinondon from Quantum Resonance needed to learn a whole new skill set- computer aided drafting. By learning a program called Autodesk123D design, shinondon can now develop specific internal parts to the bed as well as the vogel holders. Once a design is printed, tested and finalized, we can send the CAD file to a company to mass produce the part so there is no longer a 30 hour manufacturing process per bed. This will ultimately speed up production time and aid in future changes.
We can now create many different pieces that interchange based on crystals, lasers, LED's. 3D printing is opening up a whole new way of production for us where previously, the cost of prototyping was too high to send out. We can make prototypes in hard and soft plastic, wood, rubber, carbon fiber, metal. Now we do everything in house so we get immediate feedback on what works and doesn't.
1Please read the article “scalar energy and crystals” for more information. Www.indigometalworks.com/blog
Many People ask me to describe the workings of the Quantum Resonance Crystal Bed and although it seems complex, it can be broken down into a few ideas. Lets start with the basics.
The crystal bed works with five sets of conditions:
The en-trainment process is incorporated through the various aspects of the bed. The vibrations, frequencies, scalar, and intention all work together to en-train your cells. When you make a intention and get on the bed, the crystals are aligned in co-creation with your divine intelligence. The Scalar energy developed through sound, light, magnetics, and crystal all assist this process. The different frequencies generated are designed to support your bed session.
If i can put the workings of the bed into one sentence, this would be it:
"The five conditions for DNA replication are meet so a beneficial, lasting change can occur within the multidimensional cellular structure."
I would say that the bed doesn't heal but instead greatly increases the potential for the bodies own ability to heal. We have turned on the switches. If we increase the homeostasis of the body, then the body can operate at a higher efficiency, thus healing itself. We do this through a loving conglomerate of energy systems.
We believe the most important aspect to this equation is the person's intentions or what they want and mentally creare prior to a treatment.
By using key elements of how DNA instructs cells to behave, we have developed a system where it piggybacks the information being sent to cells. The information being sent is like the Hippocratic oath (do no harm) and is simply boosting the internal systems through the above mentioned ways.
But how does all this stuff work together?
Let's start with how the DNA works on a 1/2 science, 1/2 spiritual basis.
DNA needs to meet a few conditions before it can actually start to work.
So the five conditions above are what i consider to be the outside stimulus to the internal mechanism of healing. When we Look at what the Quantum Resonance Crystal Bed is using to generate the energies to heal, then we can say that the system is near complete and from an outside perspective, it is. Please note that there are many other factors of the internal system that need to be meet like healthy diet.
1 The synchronization of biology to a rhythm through various mediums.
2 Scalar : A system of energy that has no measurement in traditional science. Scalar energy travels through all known objects yet alters each objects coherence with other energy. Scalar can be generated when the same (like sound) vibration and frequency creates and equal and opposite wave thereby canceling out the original form and leaving the scalar energy.
Since man has been able to dig up rocks, he has marveled at the beauty and clarity of certain types of rocks like gemstones. These shiny rocks have captivated mans desires while he busily digs deeper or artificially creates the penultimate gemstone. There is however, another side to gemstones which goes unseen by most, and that is the multidimensional nature of crystals and gemstones.
You see, crystals have a special ability to hold, transmute, and absorb energy. Not only can they work with energy in these unique ways, but they can develop scalar energy or be used for precise measurement of time. In this article, we we be focusing on the scalar energy side of crystals.
Scalar energy has many names- zero point, infinite, nothingness energy, and scalar. All these terms refer to the same thing- the ability to cancel out a waveform by applying the equal and opposite of it. If we remember back in early psychics classes, a force cancels itself out when there is a equal and opposite force- in this case we are talking about a frequency and it's amplitude (how strong it is)
When we cancel out the 3D waveform, it takes away the 3D energy but leaves the higher dimensional energy there, waiting for us to use it. The higher dimensional energy no longer has a purpose because we took away the 3D part of it. If we don't contain the energy, it quickly dissipates in the surrounding field. This doesn't mean we cannot use it; On the contrary, we can store these energies in the matrixes of crystals. When we develop and store scalar energy with crystals, they can direct this scalar energy to be used with something even more amazing. The scalar energy can pass straight through a object in 3D because it is traveling at a higher dimension. When we pass the scalar information through a lower dimensional object, that object then takes on part of the scalar transmission. The amazing work that can be done when we couple specific energy systems into the scalar field is what humanity is just beginning to understand and we will delve into that a little later.
Crystals have the most beautiful internal structures known as sacred geometry. All these shapes compounded upon themselves, repeating to form the basis of geometry know as the five platonic solids. Five simple shapes of: cube, tetrahedron, icosahedron, dodecahedron, and octahedron. All these big words are based off the Greek word of polythedra or "many faces". So these repetitive structures have the ability to send energy into themselves and build and store it like a battery. They can do this because the nature of scared geometry maintains an equal state as energy builds, never overloading due to the quantum nature of a higher dimensional field (remove time, add oneness) plus all those "many faces". When crystals are subject to certain fields, they will start the generation of scalar energy. Before we jump into what types of energy are best suited for humans, lets look a little closer at the shapes.
We looked at the internal structure of the crystal and saw the specific shapes of the platonic solids, but what happens when we cut shapes into the outside of the crystal and make external geometry? Like a mirror, a crystal can reflect light or energy and when we cut the outside to a specific shape, it can then reflect energy a specific way on the inside. By shaping the outside, we create reflections on the inside- sounds like esoteric bodywork to me.
We have created lenses for microscopes to peer into the smallest particles while working the telescope to see distant stars. These require precise, shaped lenses; just like the crystals we work. A scientist by the name Marcel Vogel pioneered work on faceted crystals and near field energetic in reference to them. His work has been crucial in creating a crystals cut to maximize scalar wave generation which are aptly named Vogel Crystals. We find that when a quartz crystal is cut similar to Mr. Vogels specifications, the refractive properties (think of mirrors) enhance the generation of the scalar waveform. This process is due to the canceling of 3D energies. Using light as an example, we can see how the light will bounce back and forth in the facets, moving down the crystal as it goes. Because the light is being refracted, a certain percentage of the light will go out of phase to the original beam and cancel itself out- this is where the scalar or zero point energy is generated and because the cancellation is happening inside the sacred geometry of the crystal, it can store or release this energy into the near field. If we add intent or pulses or information, then this new energy gets added to the mix. All of this energy can be defined as a new quantum energy. The new quantum energy creates the resonance field for which the body can use.
Combinations of pulsed UV lasers, collapsing magnetic fields and intentions have the strongest energetic in the Vogel style quartz crystals. The UV radiation of the lasers is added to the crystals without the harmful effects while the piezo effects of the pulsed magnetic field energize the crystal further. These combinations have positive lasting changes to the human chakra systems and overall well being.
We've saved the best for last; intention. If the scalar energy is the gas, then the intention is the motor. This is the motor that drives the holographic nature of the 3D. Our intentions are so powerful, they create the reality around us. Our intentions create beliefs and and beliefs reinforce old intentions. The old intentions get stored in cells, water, crystals or anything that is a blank sacred geometric structure. We can program the crystals much like the cells in our body. Cellular memory is nothing more that replaying a Vibration that has been stored in the DNA. So to can it be said that the crystals can store a vibration or energy signature simply with intention. This is why it is important to clear crystals through your favorite means. With a better understanding of a crystalline structure, we can start to understand how the crystals can play a important role in our well being and health.
What happens in a non linear or quantum way with our thoughts and a crystal? If our thoughts are stored in something that is not a part of us, than what do we call this? This is considered partial quantum entanglement- not full entanglement. Full entanglement involves switching atoms between two 3D items. I use the phrase partial quantum locking because of the energy of the thought (vibration) is "locking" into the matrix of the crystal. Once this occurs; the crystal then runs that energy as if it were a part of it, irregardless of time and space. In reiki, we call this distant healing. So it can be said that once a crystal has been programmed with intention, then all that is needed is some scalar waves from a 3D source of radiation or energetic and the intention suddenly has the fuel.
As we learn more in the fields of quantum physics we will become more receptive to the arts of subtle energy and overall well being. We will find crystals to be more than just pretty shiny things that sit atop fingers and how they can help us grow and have greater awareness of ourselves and surroundings.
Whaaaaa? Pulsed magnetic whaaaa?
This is a short article on the pulsed magnetic scalar wave in the Quantum Resonance Crystal Bed
Why do i need magnets in my healing field? It's not about the magnets but rather the way we collapse the magnetic field to produce a PULSED SCALAR MAGNETIC FIELD. This field essentially wraps around the vogel crystal and turns both crystal and magnetic field into one system- much like a quartz crystal watch. These two systems create a special magnetic wave that talks to the DNA. Furthermore, the pulsed field positively affects the laser and light waves by changing the photons to a resonance with the frequency being produced (the frequency generator in the control box)
The Magnetic field is called a Mobius coil and is proprietary to the Quantum Resonance Crystal Bed. Each coil is hand wound and painstakingly designed to assure the proper field collapse.
We're talking about very safe and low voltage in the magnetic field that does not harm the human magnetic field. We do not need a strong field when working with the scalar waves because of their ability to go through the body. This magnetic scalar wave adds the important element of magnetism to the whole construct. DNA has to have a magnetic field to operate, so what we are doing is adding our own pulses of information to the existing field.
As with the lasers, the mobius coil can be changed by the user to most frequencies in Hz, Mhz, Khz field.
Published on Jul 28, 2012
Prof. Konstantin Meyl, todays Tesla, is explaining his research in biology. He detected that our whole body works with scalar waves, that the DNA transports information and energy with a magnetic scalar wave, that the nerves transport scalar waves, that the nodes Ranvier detected indicate a standing, longitudinal wave = scalar wave and that bio resonance medicine and homeopathy use scalar waves.